Skip to main content
CM Lodestar Classic - Main Picture
CM Lodestar Classic - Main Picture

Lodestar Classic Electric Chain Hoist

Electric Chain Hoists

CM Lodestar Classic - Main Picture
CM Lodestar Classic - Main Picture

The CM Lodestar Electric Chain Hoist is recognized as the standard in overhead lifting. Generations of users have relied on the power and dependability of the CM Lodestar® for their material handling applications.

Features and Benefits

FEATURES and BENEFITS:

  • Available as individual hoist units, in hoist/trolley combinations or as integral components of complete lifting systems and can be used in numerous applications and industries.
  • H4 Duty makes hoist ideal for heavy-duty industrial applications.
  • Gearing designed for exceptionally long life and quiet operation. Gear train lifetime lubricated with non-oxidizing grease.
  • Hoist duty motor, standard overload protection device and standard screw-type limit switches
  • Hardened, forged-steel, latch-type hooks and Hoistaloy load chain for long, dependable service
  • Precision machined and hardened liftwheel with hardened chain guides to ensure chain fits tightly and securely in liftwheel.
  • Rugged control station (NEMA 4X).
  • Voltage board allows you to quickly change from low voltage to high voltage by simply repositioning the receptacle.
  • Easy to install and maintain with no special tools required for disassembly.
  • Made in the USA and comes with a lifetime warranty
  • Each hoist is thoroughly inspected and tested to over 125% of rated load prior to shipment
  • Meets ASME B30.16

 

SPECIAL APPLICATION:

  • Harsh environment hoists available for rugged applications, including plating, galvanizing and washdown applications.
  • Hoists with climbing capability available for temporary rigging or lifting applications - must be used in inverted position only.
  • Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
  • Articulating suspension available for 3 ton only.

 

SPECIFICATIONS:

  • Ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc).
  • Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor.
  • Special provisions should be made to ventilate the space and/or shield the Hoist from radiation.
  • Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C).
  • Reference the Hoist's Operation and Maintenance Manual.
  • Contact factory for requests below 0°F (-17°C).