Skip to main content
Find a contact

Yale Mtrac Endless Winch

The Yale Mtrac® endless winch combines state-of-the-art industrial design with technical innovation to solve a specific customer need – the need for a safe and simple handling solution for mobile applications.

We did just that. Because the rope of the endless winch is not collected during operation, there is no limit to the lifting height and traction length when using this product.

And, with a full offering of wire ropes and accessories, this winch can be used in virtually any application requiring a hoist, e.g. on construction sites, in maintenance and assembly, in wind mills and power supply, water and utility sector, overhead line maintenance, etc.

Need Assistance?

Not sure if this is the right product for your application, or need a custom solution? Contact us today for help from an expert.

Features & Benefits

  • Control pendant (IP 65 type of enclosure) is connected via a control cable.
  • Standard power cable has a length of 10 m and is fitted with a CE connector plug (or a Schuko plug).
  • 42 V low-voltage control.
  • Ergonomic, fitted carrying handle features a comfortable plastic grip.
  • Mounting feet fixed on the housing for easy setup.
  • Standard operating voltages of 400 V, 3 Ph, 50 Hz or 230 V, 1 Ph, 50 Hz.
  • Galvanized, high-density steel rope is 10 m long (dia. 6.5 mm) and features a safety hook on one end as well as a rounded, plastic-coated tip at the loose end.
  • Two spring buffers with adjusting rings can be attached to the wire rope to set the limit switches for both upward and downward movement.
  • Drive sheave is made of especially hardened steel designed to ensure long service life.
  • The patented (German Patent DE 10 2012 100 099) bi-directional actuator ensures the rope is safely guided and securely held in place.
  • Slip clutch is located outside of the load path for added safety.
  • Limit switches ensure safe cut-out for the upper and lower hook positions.
  • Electromagnetic brake holds the load safely, even in the event of a power failure.
  • Winch is classified up to 1 Bm/M3 to FEM/ISO.
  • Winch is protected up to IP 55.